Drill Steel Extractor

11-689

Get this key accessory to fully mechanize your site and keep up with the many sites all over the world that are now operating more efficiently with B&D's Drill Steel Extractor.

When the drill steel becomes so jammed that a rod twister no longer produces the desired effect, you have two options:

• Waste time and money by tiring out two men with the long task of trying to manually hammer the drill steel loose using a drill clamp, pick and sledge hammer - which does not guarantee no damage or loss to the drill steel.

OR

• Improve production at your site with the addition of a B&D Drill Steel Extractor and have just one man pull out the drill steel in a few seconds without damage or loss.

The B&D Drill Steel Extractor is the key accessory to full mechanization on site and continues to keep sites operating efficiently all over the world.

It works like a rock drill but in the opposite direction. The drill steel is loosened and extracted in a sensible manner by compressed air. The shank of the drill steel is put sideways on to the inlet of the machine and firmly fixed to the extractor by means of a self-tensioning wedge. Recoil is taken up by a strong spring. The B&D Drill Steel Extractor pulls in all directions and at any height, also of course at floor level. It is available for standard 7/8 by 4 1/8 in hex shank drill steel.